offlineshield.blogg.se

Optical adapters for 2010 mac pro
Optical adapters for 2010 mac pro







optical adapters for 2010 mac pro
  1. #Optical adapters for 2010 mac pro update
  2. #Optical adapters for 2010 mac pro upgrade
  3. #Optical adapters for 2010 mac pro pro
  4. #Optical adapters for 2010 mac pro software

This is a little slower clock speed than the W3580, but I’d get two extra cores. With the firmware updated, I started looking around at other CPUs and found the Intel Xeon W3670 3.2Ghz 6-core for about $120 at Star Micro.

#Optical adapters for 2010 mac pro pro

Check that everything works and then boot info safe mode and enable SIP: csrutil enableĪfter doing these steps my Mac Pro showed as a MacPro 5,1 model, which meant it could now support better CPUs such as the 6-core Westmere CPUs.Run the Updater Tool, which recognized the mounted DMG, rebooted and applied the firmware update.Download the (unsupported by Apple) 3rd party Updater Tool to apply this firmware update.

#Optical adapters for 2010 mac pro update

Download the firmware update from Apple and open the DMG to mount it in the Finder.Boot into safe mode and disable System Integrity Protection (SIP) on OS X 10.11 El Capitan by running this command in the Terminal: csrutil disable.This proved to be a little tricky, but easily doable using these steps: More research uncovered that it is actually possible to update the 2009 Mac Pro firmware to the one used by the 2010/2012 Mac Pros. The only difference is those newer models have a newer firmware that supports even better processors and allows for sound over DisplayPort to HDMI (not relevant to me). I was about to purchase the W3580 when I discovered with a little more digging that the 2009 Mac Pro (MacPro 4,1) is essentially the same as the 20 model Mac Pros (MacPro 5,1).

#Optical adapters for 2010 mac pro upgrade

These CPUs seemed to be going for about $120 or so, making it a worthwhile upgrade cost. But updating the single CPU definitely seemed like an option.Īfter some initial CPU research I had considered getting an Intel Xeon W3580 3.33 Ghz quad-core (Nehalem), which would be about a 14% speed improvement. It didn’t take much searching to find out that even a CPU upgrade is pretty easy to do! It is also possible to upgrade my single-CPU system to a dual-CPU configuration, but that requires an all-new daughter board, which greatly increased the cost enough to make it impractical. I had recalled reading in the past that the Mac Pro CPU might also be upgradeable, but I had never looked into it before. There is nothing that can be done about Thunderbolt, however. I don’t have a big need for USB3 just yet since I can keep so many drives inside the Mac Pro, but it’s nice to know this low-cost option is available. USB 3 can easily be solved with a $60 PCI card to add four superspeed ports. It also doesn’t have Thunderbolt or even USB 3. Add the 2nd optical drive slot, plus 3 empty PCI card slots and this Mac Pro can hold a total of 8 drives, all of which are inside the case!Īs awesome as the storage management is, this thing is not nearly as fast as the latest Mac Pro or even the latest iMacs. Overall, there is space for four 3.5" (or 2.5" drives with adapters) in the drive bays. Plus I have other large spinning hard drives for archival purposes in the standard drive bays. I have one SSD in the 2nd optical drive slot and another mounted on a PCI card (the OWC Mercury Accelsior S). Adding drives to this Mac Pro is super easy. Over the years I’ve upgraded it with several SSDs and to 16GB RAM. My Mac Pro is a single-CPU, quad-core 2.93Ghz model (Intel Xeon W3540) with the ATI Radeon HD 4870 video card. So I’m sticking with my classic Mac Pro (or Mac Pro tower) for the time being.

#Optical adapters for 2010 mac pro software

As a software developer, I prefer to have lots of storage and do not need dual video cards. I’ve owned this Mac longer than any other prior Mac which might explain why Apple does not make Macs that are easily upgradable any longer they get fewer sales of new hardware.Īs cool as the (not-so-new) 2013 Mac Pro is, it is sti ll too expensive and not upgradable enough for my purposes. I’m the proud owner of a 2009 Mac Pro, which I’ve owned since 2010.









Optical adapters for 2010 mac pro